How To Add Usb 3.0 Driver In Windows 7

How to Install Windows 7 through USB 3.0 port?

Yous are here:  Tutorials > How to Install Windows 7 through USB 3.0 port?

When installing Windows 7 through USB drive on new skylake system, you may receive the following error message,

"A required CD/DVD drive device commuter is missing. If you have a commuter floppy disk, CD, DVD, or USB flash bulldoze, please insert information technology at present. "

In such case, the installation can't go on. The problem is caused by a missing USB 3.0 driver in the Windows 7 installation packet. The Windows vii installation program doesn't recognize the new USB iii.0 port, hence we demand patch the commuter to the installation package. Please follow the steps,

Step ane - Create Windows 7 bootable USB bulldoze from Windows 7 ISO file

Y'all can find the detail process hither. Let's assume the USB drive has the drive letter H: after yous accept created Windows 7 bootable USB bulldoze successfully.

Stride 2 - Download and unpack Intel(R) USB three.0 eXtensible Host Controller Commuter

Yous may download it from https://downloadcenter.intel.com/product/65855 .

There are two zippo files for the driver. Simply unzip them to a local binder, with different sub folder for each file, for example, C:\USB3\driver1, and C:\USB3\driver2.

Stride 3 - Run PowerISO DISM Tool

Run PowerISO, and select the bill of fare, "Tools --> DISM Tool". On Windows vista or above Windows operating systems, y'all volition need confirm UAC dialog to continue.

Step four - Mountain WIM file in the USB drive

In "DISM Tool" dialog, select "Mountain / Unmount" page, and click the button "Mount...".

The "Mountain paradigm" dialog volition popup. Click "Browse" push to select the kick WIM file in USB drive, for instance, H:\sources\boot.wim.

Select the epitome index from the listing, commonly, it should be "2: Microsoft Windows Setup (x64)" for 64-chip Windows 7 ISO file, or "two: Microsoft Windows Setup (x86)" for 32-bit Windows 7 ISO file.

Create an empty folder, for example, C:\mount, and select information technology for the mount path.

Click "Mount" to mountain the prototype in WIM file to the specified path.

You should go the message, "The operation completed successfully" after the paradigm has been successfully mounted to the specified the path. Click "OK" to close the message box.

Pace five - Patch drivers into the image

Select "Commuter Servicing" page, and select "C:\mount" from the mounted directories list.

Click "Add together driver..." button.

The "Add driver" dialog will popup. Select "C:\usb3" for the driver folder, and check the option, "Recurse - Query all subfolders for drives".

Click "OK" to add the drivers to the image.

You should come across the bulletin like beneath afterward the functioning completes. Click "OK" to close the message box.

Step 6 - Unmount WIM file

Select "Mount / Unmount" page, and select "C:\mount" from the images list.

Click "Unmount" push button.

The "Unmount paradigm" dialog volition popup. Make sure the unmount path is "C:\mount", and check the option, "Commit - Relieve the changes when unmounting paradigm file". Click "Unmount" to unmount the image.

You should become the message below after the performance completed successfully.

You might receive the mistake message below when unmounting the image,

The directory could not be completely unmounted. This is normally due to applications that still have files opened within the mount directory. Close these files and unmount once more to complete the unmount procedure.

In such case, please close all programs which might open up the files in mounted directory, particularly close all Explorer Windows, and then try unmounting the image again.

Step vii - Patch drivers to install.wim

Repeat step iv to step half dozen to patch drives to install.wim. Usually install.wim tin can be found in the sources folder, for example, the full path name looks like H:\sources\install.wim.

If in that location are several images in install.wim, you need select the right prototype to patch. If you are not sure which image should exist patched, you can patch all images in install.wim (repeat step 4 to step 6 for each image in the wim file).

Step 8 - Install Windows vii from the patched USB drive

Yous have patched the USB 3.0 driver to Windows 7 installation bundle successfully. Yous can now use it to install Windows 7 from the USB three.0 port, which is present in most new skylake computers. Please too make sure that the BIOS is properly configured for booting from the USB device.

Copyright 2004-2022 Power Software Ltd. All rights reserved.

Source: https://www.poweriso.com/tutorials/install-windows-7-from-usb-3.0-port.htm

Posted by: marquisvould1939.blogspot.com

Share this post